Tag: 3D Printing

In this part I am going to focus on the fabrication of all the metal chassis disk components to replace all the temporary laser cut acrylic and 3D

With all the planning complete, it is time to start on initial part fabrication and a test assembly of the chassis.

I decided to try and replicate the ship name plate from the Rocinante.

It’s time to move onto priming, and cleaning up this helmet to get it ready for paint.

With all the printing finished it is time to start cleaning up the parts and sanding away those layer lines so I can get everything assembled.

This is the start of a multi-part project where I attempt to recreate the helmet from Disney’s The Mandalorian.

So, I figured I should make a crosscut sled for it. I started with a piece of 24” x 48” x 1/2" birch plywood. I originally had planned